BMW E36 325i limited slip differential, 3.15 ratio, stock 25% lockup, 188mm ring size. This is a used and in good working condition E36 325i limited slip differential. I removed this from a'93 manual trans car that was smashed in the front. I did not catch the mileage. I have cleaned this unit to look as it does in the photos.
The rear cover was removed to inspect the ring and pinion gear and inner workings for abnormal wear. I cleaned it up and took the photos.
I did not paint the outside to make it look new like other sellers do. This is the real deal - no gunk, rust or residues, suggesting this is a well cared for diff, with the oil changed according to BMW recommendations. Note how nice the paint looks! I did not paint it!Be assured, this diff is in great shape and will not whine! The input shaft bearing feels like new and the diff is in great shape, with no leaks. It takes experience to evaluate these units, so you can trust my description.
You will need to install your rear cover and re-seal the rear cover using RTV or similar gasket material. This diff will fit all E36 US and european models from'92-98 with a U-joint type driveshaft rear flange. If you have a CV type (like on some M3), the flange from your diff can be installed on this diff by a qualified differential shop. This will fit the 6 cylinder cars, and not the 4 cylinder 318 and 323 models with the small case diffs. The unit weighs approximately 90 lbs when boxed up.
Thanks for checking this out, and good luck. Powered by SixBit's eCommerce Solution.The item "BMW E36 OEM 3.15 Clutch Type 188mm Med Case Limited Slip Differential LSD Posi" is in sale since Friday, February 14, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Differentials & Parts".
The seller is "aardvarc" and is located in Bonita, California. This item can be shipped to United States, Canada.