BMW E30 E28 E36 Clutch Limited Slip Differential LSD 188 Med Case Carrier Spool

  
BMW Medium Case 188mm Limited Slip Carrier Spool. This is a used and in good condition limited slip spool removed from an E34 5-series or E32 7-series. Fits most 6-cylinder (and 8 cyl) BMWs of the'70's, 80's, and'90s (E23, E24, E28, E30, E32, E34, and E36 medium case differentials). Fits 3.15 and shorter gears (3.25, 3.45, 3.64, 3.73, 3.91, 4.10, and more) from the'80s and'90s, including E36 325i/S 3.15:1 ratio open diffs. Will not fit 3.07 and taller gears (2.93, 2.79, etc). This clutch type limited slip assembly is necessary to convert a non-LS differential into a limited slip differential. I recommend that a rear end specialist do the conversion, but it is not too difficult and a competent shade tree mechanic can complete the conversion.

Just take out the open spool, remove the ring gear, install the ring gear on this LS spool, reassemble, and you have yourself a limited slip. No special setup required, but make sure everything is clean before installing the rear cover. The spool is in very good condition, with no corrosion or damage.

These are photos of the current unit. BMW stopped installing LSDs in non-M cars in the late'90s, so here is your chance to obtain what will be a very rare item. Thanks for checking this out.

Powered by SixBit's eCommerce Solution. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Transmission & Drivetrain\Differentials, Assemblies & Parts\Additional Differential Parts". The seller is "aardvarc" and is located in this country: US. This item can be shipped worldwide.

• Brand: BMW
• Items Included: Bearing, Posi Unit, carrier
• Manufacturer Part Number: 188mmSpool
• Differential Type: Mechanical Clutch Type Limited-Slip