CXP STAGE 3 RACE CLUTCH+14LBS FLYWHEEL KIT Fits BMW E36 E34 E39 M50 M52 S50 S52

  
CXP STAGE 3 RACE CLUTCH+14LBS FLYWHEEL KIT Fits BMW E36 E34 E39 M50 M52 S50 S52. ClutchXperts Stage 3 Copper Ceramic Racing Clutch Kit is a brand new Stage 3 heavy duty racing pressure plate with Stage 3, 6-Puck Sprung Copper Ceramic Racing Disc setup can hold and 70% more pressure increase over stock. If you want the best the industry has to offer, ask for ClutchXperts 6-Puck Sprung Copper Ceramic Racing Disc. The ClutchXperts Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced hybrid iron and carbon combination delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the ClutchXperts Racing 6-puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates.

This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality'upgrade' from the original equipment clutch. This kit comes with everything you need for a new clutch job or clutch upgrade. If you are selecting a kit without a new flywheel, then be sure to resurface and rebalance your old flywheel prior to installation for best performance and result. The ClutchXperts Forged Chromoly lightweight flywheel carries significant benefits, with no disadvantages.

Due to its reduced mass, it allows an engine to have quicker throttle response and rev faster under acceleration. Conversely, under a drop throttle condition, the car will slow down quicker due to less rotational mass at the crank.

Though it does not create additional horsepower, the flywheel does allow the engine to more rapidly transfer its power to the drive train. You lose nothing in reliability, safety, or drivability on the street. What you gain is neck-snapping acceleration from your car.

Using a lightweight, ClutchXperts lightweight flywheel is a race proven way to improve the performance of any street or race car. Lightweight flywheels have been used for many years by the world's most elite cars to improve both useable horsepower and extend engine life. ClutchXperts Stage 3 Heavy Duty Pressure Plate (2100lbs Clamping Load).

ClutchXperts Stage 3 6-puck Sprung Ceramic Racing Disc (240mm, 10 Spline). ClutchXperts Forged Chromoly Lightweight Singlemass Flywheel (14lbs).

ClutchXperts Premium Heavy Duty Clutch Throwout Release Bearing. ClutchXperts Premium Heavy Duty Clutch Pilot Bearing. ClutchXperts Premium Heavy Duty Clutch Alignment Tool. Fits 1998 - 1999 BMW 323i, 323is (2.5L 6cyl M52; fits convertible and 2 door coupe only; E36). Fits 1992 - 1995 BMW 325i, 325is (2.5L 6cyl M50; E36). Fits 1994 - 1995 BMW 325i (2.5L 6cyl M50; fits convertible only; E36).

Fits 1996 - 1998 BMW 328i (2.8L 6cyl M52; fits 4 door sedan only; E36). Fits 1996 - 1999 BMW 328is, 328i convertible (2.8L 6cyl M52; E36). Fits 1991 - 1995 BMW 525i (2.5L 6cyl M50; E34). Fits 1997 - 1998 BMW 528i (2.8L 6cyl M52; E39). Fits 1995 - 1999 BMW M3 (3.0L, 3.2L 6cyl S50, S52; E36).

Fits 1997 - 1998 BMW Z3 (2.8L 6cyl M52; E36). Fits 1998 - 2002 BMW Z3 M coupe, M Roadster (3.2L 6cyl S52, S54; E36). Manufacture Part Number : CXP-BTF04118HP3 CXP-BTF04118CF. Surface Finish : Cast Iron, Copper-Ceramic Sprung, Forged Chromoly, Steel. Country of Manufacture : United States.

FILE PICTURES ARE FOR REFERENCE ONLY. Must be in brand new, resalable condition. We are located in Southern California.

The item "CXP STAGE 3 RACE CLUTCH+14LBS FLYWHEEL KIT Fits BMW E36 E34 E39 M50 M52 S50 S52" is in sale since Wednesday, April 24, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Transmission & Drivetrain\Clutches & Parts". The seller is "clutchxperts_usa" and is located in Anaheim, California. This item can be shipped worldwide.

• Manufacturer Part Number: CXP-BTF04118HP3 CXP-BTF04118CF
• Warranty: Yes
• Brand: ClutchXperts
• Country/Region of Manufacture: United States
• Surface Finish: Cast Iron, Copper-Ceramic Sprung, Forged Chromoly, Steel
• Clutch Material: Copper-Ceramic
• Clutch Disc Style: Puck
• Pressure Plate Type: Diaphragm
• Horse Power: 379lb-ft
• Torque: 399HP