PR Stage 1 HDG Clutch Kit & Chromoly Flywheel Fits BMW M3 Z M Coupe Roadster E36

PR Stage 1 HDG Clutch Kit & Chromoly Flywheel Fits BMW M3 Z M Coupe Roadster E36. Just contact our support team.

Checkout safely with peace of mind. Platinum Racing Stage 1 Clutch Kit and Chromoly Lightweight Flywheel Key Features. 4140 Chromoly Steel Lightweight Flywheel which are CNC machined and dynamically computer balanced to 15,000 RPM. Premium Ductile/ Nodular Cast Iron Pressure Plate which provides maximum strength and the highest wear resistance.

Our Diaphragm springs endure a multi-stage extreme heat-treating process which results in the ultimate durability and quality. Our Stage 1 clutch disc is made from the highest quality high copper organic friction material for increased strength, durability, and smooth engagement.

Recommended for daily drivers, performance street driving and light track use. Recommended break-in period: 500 miles. 4140 Chromoly Lightweight Flywheel 14.98 lbs; a set of 8 ea. Stage 1 HD High-Copper Steel Backed Organic Disc (9-1/2" x 1-1/8" x 10 spline). Japanese Pilot Bearing / Bushing (if applicable).

OEM-Like engagement and pedal feel. Life: With our high-quality friction material you will see extended life. Quality: All products are designed, engineered, assembled, tested, and inspected by Platinum Racing to ensure highest quality. Proudly made in the USA. PLATINUM Stage 1 High Copper Steel Backed Organic Clutches only use premium friction materials that are resistant to slippage and burst.

Increased clamp loads give the necessary capacity to handle lightly modified engines. This is the ideal clutch for street and light horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads.

All of our Stage 1 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement. These clutch covers are designed to achieve a clamping load that is higher than the genuine part allowing a higher torque transmitting capacity. Ductile material is used for all pressure plates, and high burst strength can be achieved in all temperature ranges.

High-Copper Steel Backed Organic Disc. This advanced facing material provides the high heat resistance essential for motorsports. It was developed by reviewing both the copper wire ratio and the composition of the high strength fiber. The High-Copper Steel Backed Organic Disc maintains the superior half-engagement feeling specific to the Organic material. With improved high heat resistance, it provides the functionality essential for street performance and mild racing applications.

PLATINUM Lightweight Flywheels combine low weight, low inertia and high thermal capacity. They are designed for light to moderately tuned racing cars for drag racing, autocross, drift, and rally events, as well as street usage. They are made from solid one-piece billet 4140 chromoly steel or chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the airflow which improves the cooling of the clutch.

The ring gear teeth are integrated onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and has the possibility of separating from the flywheel due to the different expansion coefficients of aluminum and steel. Newly available are lightweight, solid replacements for vehicles fitted with OE dual mass flywheels. PLATINUM lightweight flywheels have passed engineering tests to 15,000-18,000 RPM.

They are guaranteed not to fail to the said RPM, and are all SFI approved. Platinum Racing Stage 1 Clutch Kit and Chromoly Lightweight Flywheel Key Features: 4140 Chromoly Steel Lightweight Flywheel which are CNC machined and dynamically computer balanced to 15,000 RPM Premium Ductile/ Nodular Cast Iron Pressure Plate which provides maximum strength and the highest wear resistance. Mounting bolts included Heavy-Duty Performance Pressure Plate Stage 1 HD High-Copper Steel Backed Organic Disc (9-1/2" x 1-1/8" x 10 spline) J. 240mm Full Face Sprung Hub. HD Reinforced German 51CrV4 Diaphragm. Clutch Kit Flywheel Bundle Set.

9.45 in (240 mm). Platinum Racing is your one stop shop for all your clutch and flywheel needs. We only offer the highest quality kits and premium friction materials all for an unbeatable value.

WHAT OUR CUSTOMERS ARE SAYING ABOUT US. Car drives like brand new! PR STREET FLYWHEEL+EXEDY OEM KIT Fits 94-01 Acura Integra 1.8L B SERIES HYDRO. PR Stage 5 Clutch Kit & 4140 Performance Flywheel For 05-10 Ford Mustang 4.6L V8.

PR Stage 1 Street Clutch Flywheel Kit For Toyota Celica All Trac MR2 Turbo 3SGTE. PR Stage 3 Clutch Kit+Chromoly Flywheel Fits Lexus IS300 02-05 2JZ-GE W55 JCE10.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Transmission & Drivetrain\Clutch Parts & Kits\Clutch Kits". The seller is "top1racing" and is located in this country: US. This item can be shipped worldwide.

Country/Region of Manufacture: United States
Manufacturer Warranty: 1 Year
Clutch Disc Style: 240mm Full Face Sprung Hub
Fitment Type: Performance/Custom
Manufacturer Part Number: PR-1S-SBHC-1895
Mounting Hardware Included: Yes
Vintage Part: No
Transmission Type: Manual
Brand: Platinum Racing
Pressure Plate Type: HD Reinforced German 51CrV4 Diaphragm
Number of Teeth: 112 ring gear teeth
Type: Clutch Kit Flywheel Bundle Set
Flywheel Material: 4140 Chromium-Molybdenum Forged Steel
Input Spline Quantity: 10
Disc Diameter: 9.45 in (240 mm)
Disc Material: Organic
Input Shaft Diameter: 1-1/8\