PR Stage 2 Clutch Kit+Racing Flywheel & Sachs Bearing For BMW 328 525 528 M3 Z3

  

PR Stage 2 Clutch Kit+Racing Flywheel & Sachs Bearing For BMW 328 525 528 M3 Z3. Just contact our support team. Checkout safely with peace of mind. Platinum Racing Stage 2 Clutch Kit and Chromoly Lightweight Flywheel Key Features.

4140 Chromoly Steel Lightweight Flywheel which are CNC machined and dynamically computer balanced to 15,000 RPM. Premium Ductile/ Nodular Cast Iron Pressure Plate which provides maximum strength and the highest wear resistance. Our Diaphragm springs endure a multi-stage extreme heat-treating process which results in the ultimate durability and quality. Full face Copper-Kevlar Steel Backed Organic friction material which provides greater holding capacity and longer lifespan. Recommended for daily drivers, performance street driving and moderate track use.

Recommended break-in period: 500 miles. 4140 Chromoly Lightweight Flywheel 14.98 lbs, a set of 8 ea. Stage 2 HD Copper-Kevlar Steel Backed Organic Disc (9-1/2" x 1-1/8" x 10 spline).

Japanese Pilot Bearing / Bushing (if applicable). OEM-Like engagement and pedal feel. Life: With our high-quality friction material you will see extended life. Quality: All products are designed, engineered, assembled, tested, and inspected by Platinum Racing to ensure highest quality. Proudly made in the USA.

PLATINUM Stage 2 Copper-Kevlar Organic Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle lightly modified engines. This is the ideal clutch for street and Low-Medium horsepower track use. Drivability is similar to the stock clutch. Pedal efforts will be slightly higher because of the higher clamp loads.

All of our Stage 2 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth clutch engagement. These clutch covers are designed to achieve a clamping load that is higher than the genuine part allowing a higher torque transmitting capacity. Ductile material is used for all pressure plates, and high burst strength can be achieved in all temperature ranges.

This advanced facing material provides the high heat resistance essential for motorsports. It was developed by reviewing both the copper wire ratio and the composition of the long lasting kevlar.

The High-Copper Organic Disc has a nice smooth engagement and the wear rate is lower even at high temps. With improved high heat resistance, it provides the functionality essential for street performance and low-mild racing applications. If you are looking for longevity, and something nice for your weekend warrior, our Stage 2 kit is your go-to.

PLATINUM Lightweight Flywheels combine low weight, low inertia and high thermal capacity. They are designed for light to moderately tuned racing cars for drag racing, autocross, drift, and rally events, as well as street usage.

They are made from solid one-piece billet 4140 chromoly steel or chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the airflow which improves the cooling of the clutch. The ring gear teeth are integrated onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and has the possibility of separating from the flywheel due to the different expansion coefficients of aluminum and steel.

Newly available are lightweight, solid replacements for vehicles fitted with OE dual mass flywheels. PLATINUM lightweight flywheels have passed engineering tests to 15,000-18,000 RPM. They are guaranteed not to fail to the said RPM, and are all SFI approved.

Platinum Racing Stage 2 Clutch Kit and Chromoly Lightweight Flywheel Key Features: 4140 Chromoly Steel Lightweight Flywheel which are CNC machined and dynamically computer balanced to 15,000 RPM Premium Ductile/ Nodular Cast Iron Pressure Plate which provides maximum strength and the highest wear resistance. Mounting bolts included Heavy-Duty Performance Pressure Plate Stage 2 HD Copper-Kevlar Steel Backed Organic Disc (9-1/2" x 1-1/8" x 10 spline) Japanese Release Bearing J. High Torque Full Face Sprung Hub. Clutch Kit Flywheel Bundle Set. 9.45 in (240 mm).

SACHS Clutch Release Bearing Included. Platinum Racing is your one stop shop for all your clutch and flywheel needs. We only offer the highest quality kits and premium friction materials all for an unbeatable value. WHAT OUR CUSTOMERS ARE SAYING ABOUT US. PR Stage 4 Performance Clutch & 10 LB Flywheel Kit For Integra 90-91 Cable S1 Y1.

TR1 STAGE 2 HD CLUTCH KIT & FLYWHEEL FOR 89-91 HONDA CIVIC CRX CX DX LX EX Si HF. PR Stage 5 Clutch Kit+Cable+Flywheel For Ford Mustang GT 81-95 LX Cobra SVT 5.0L. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Transmission & Drivetrain\Clutch Parts & Kits\Clutch Kits". The seller is "top1racing" and is located in this country: US. This item can be shipped worldwide.

• Country/Region of Manufacture: United States
• Manufacturer Warranty: 1 Year
• Clutch Disc Style: High Torque Full Face Sprung Hub
• Fitment Type: Performance/Custom
• Manufacturer Part Number: PR-2S-SBCK-1625
• Mounting Hardware Included: Yes
• Vintage Part: No
• Transmission Type: Manual
• Brand: Platinum Racing
• Pressure Plate Type: HD German 51CrV4 Diaphragm
• Number of Teeth: 112 ring gear teeth
• Type: Clutch Kit Flywheel Bundle Set
• Flywheel Material: 4140 Chromium-Molybdenum Forged Steel
• Input Spline Quantity: 10
• Disc Diameter: 9.45 in (240 mm)
• Disc Material: Made with Carbon Kevlar Composite Facing
• Input Shaft Diameter: 1-1/8\
• SACHS Clutch Release Bearing Included: Yes