PR Stage 5 Clutch Kit and Super REV Aluminum Flywheel For BMW M3 Z3 E36 S50 S52

  

PR Stage 5 Clutch Kit and Super REV Aluminum Flywheel For BMW M3 Z3 E36 S50 S52. Just contact our support team. Checkout safely with peace of mind. Platinum Racing Stage 5 Clutch Kit and Chromoly Lightweight Flywheel Set Key Features. 4140 Chromoly Steel Lightweight Flywheel which are CNC machined and dynamically computer balanced to 15,000 RPM.

Premium Ductile/ Nodular Cast Iron Pressure Plate which provides maximum strength and the highest wear resistance. Our Diaphragm springs endure a multi-stage extreme heat-treating process which results in the ultimate durability and quality. Has double clamp load than all our other stages. 6 Puck sprung clutch disc with Sinter-Metallic friction material for ultimate holding power, maximum performance, and extended life.

Properly suited for track use, performance street driving and Light daily use. Recommended break-in period: 500 miles. 4140 Chromoly Lightweight Flywheel 10.72 lbs; a set of 8 ea.

Ultra Clamp Load Performance Pressure Plate (twice as much as our other stages). Stage 5 MIBA Sinter-Metallic Clutch Disc (9-1/2" x 1-1/8" x 10 spline).

Japanese Pilot Bearing / Bushing (if applicable). Feel: Improved throttle response, moderate pedal effort with a quick and direct positive engagement. Life: With our high-quality friction material you will see extended life. Quality: All products are designed, engineered, assembled, tested, and inspected by Platinum Racing to ensure highest quality. Proudly made in the USA. PLATINUM Stage 5 MIBA Sinter-Metallic Sprung Clutches use MIBA friction materials that are the world's first clutch lining worldwide to combine the advantages of sinter-metallic and organic friction materials, allowing you to benefit from the long service life of a sinter-metallic lining without compromising the high shifting comfort of an organic friction lining. Ultra clamp loads give the most capacity to handle low-mild-high modified N/A and forced induction engines. Drivability is a little more aggressive than all our stages. There is clutch chatter especially when using our lightweight flywheel. Pedal efforts will be moderately higher because of the dual clamp loads. All of our Stage 5 clutch discs have spring center dampers to reduce drivetrain shock and provide smooth grippy clutch engagement. These clutch covers are designed to achieve double the amount of clamping force that is higher than the genuine part allowing a higher torque transmitting capacity. Ductile material is used for all pressure plates, and high burst strength can be achieved in all temperature ranges. Our stage 5 clutch cover is the highest load single plate we offer.

6-Puck MIBA Sinter-Metallic Sprung Disc. MIBA has one of the best reputations in the world in multiple industries when it comes to their sinter-metallic friction products and that is why we use nothing but the best materials for your clutch kits. This friction material provides a nice grabby engagement while providing high heat resistance. The engagement is quick when getting off the line. This type of disc can withstand a considerable amount of heat - they can operate without fading at temperatures up to 1000°F.

This heat resistance makes them ideal for motorsports action. It's very important to break in clutches before any type of hard shifting or racing. PLATINUM Lightweight Flywheels combine low weight, low inertia and high thermal capacity. They are designed for light to moderately tuned racing cars for drag racing, autocross, drift, and rally events, as well as street usage.

They are made from solid one-piece billet 4140 chromoly steel or chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance the airflow which improves the cooling of the clutch. The ring gear teeth are integrated onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and has the possibility of separating from the flywheel due to the different expansion coefficients of aluminum and steel.

Newly available are lightweight, solid replacements for vehicles fitted with OE dual mass flywheels. PLATINUM lightweight flywheels have passed engineering tests to 15,000-18,000 RPM. They are guaranteed not to fail to the said RPM, and are all SFI approved. Platinum Racing Stage 5 Clutch Kit and Chromoly Lightweight Flywheel Set Key Features: 4140 Chromoly Steel Lightweight Flywheel which are CNC machined and dynamically computer balanced to 15,000 RPM Premium Ductile/ Nodular Cast Iron Pressure Plate which provides maximum strength and the highest wear resistance.

Mounting bolts included Ultra Clamp Load Performance Pressure Plate (twice as much as our other stages) Stage 3 MIBA Sinter-Metallic Clutch Disc (9-1/2" x 1-1/8" x 10 spline) Japanese Release Bearing Japanese Pilot Bearing / Bushing (if applicable) Alignment Tool The Platinum Racing Difference: Feel: Improved throttle response, moderate pedal effort with a quick and direct positive engagement. Clutch Cover These clutch covers are designed to achieve double the amount of clamping force that is higher than the genuine part allowing a higher torque transmitting capacity. 6-Puck MIBA Sinter-Metallic Sprung Disc MIBA has one of the best reputations in the world in multiple industries when it comes to their sinter-metallic friction products and that is why we use nothing but the best materials for your clutch kits. PLATINUM Lightweight Flywheel PLATINUM Lightweight Flywheels combine low weight, low inertia and high thermal capacity.

Clutch Kit Flywheel Bundle Set. 9.45 in (240 mm). High Torque 6-Puck Solid Hub. Platinum Racing is your one stop shop for all your clutch and flywheel needs.

We only offer the highest quality kits and premium friction materials all for an unbeatable value. WHAT OUR CUSTOMERS ARE SAYING ABOUT US.

TR1 STAGE 2 CLUTCH For 96-05 CHEVY GMC BLAZER S10 T10 JIMMY SONOMA C K 1500 4.3L. CLUTCH KIT STAGE 3 TR1 FOR 92-05 HONDA CIVIC DELSOL D15 D16 D17 SOHC. SACHS-TRP STAGE 6 IRONMAN CLUTCH KIT FLYWHEEL BEARING Fits BMW 328 525 528 M3 Z3. PR Stage 3 Clutch Kit+Chromoly Flywheel For 06-17 Subaru Impreza WRX EJ255 FA20F. PR Stage 3 Clutch Kit For Ford Ranger Sport 93-10/94 STX XL XLT 2.3L 3.0L. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Transmission & Drivetrain\Clutch Parts & Kits\Clutch Kits". The seller is "top1racing" and is located in this country: US. This item can be shipped worldwide.

• Brand: Platinum Racing
• Type: Clutch Kit Flywheel Bundle Set
• Disc Diameter: 9.45 in (240 mm)
• Manufacturer Part Number: PR-5XT-CB-1164
• Transmission Type: Manual
• Input Spline Quantity: 10
• Number of Teeth: 112 ring gear teeth
• Disc Material: Ceramic
• Country/Region of Manufacture: United States
• Manufacturer Warranty: 1 Year
• Input Shaft Diameter: 1-1/8\
• Clutch Disc Style: High Torque 6-Puck Solid Hub
• Pressure Plate Type: HD German 51CrV4 Diaphragm
• Fitment Type: Performance/Custom
• Flywheel Material: 6061 T6 Aluminum / 1050 High Carbon Steel Insert
• Mounting Hardware Included: Yes
• Vintage Part: No