PSI STAGE 1 RACE CLUTCH KIT+ALUMINUM FLYWHEEL 325 328 525 528 M3 Z3 E34 E36 E39. PSI Racing stage 1 clutch kit is an upgrade heavy-duty clutch set up for those who seeks streetable high performance clutch.
It is a direct factory replacement parts thus no modifications are needed. The clutch kit includes only the highest grade components and it's ready for hot action on street and track.
The premium organic friction material for high heat tolerance, quick recovery, good friction and long life. The heavy-duty solid center unit boasts heat treated hub and retainer rivets for the maximum power and durability. The PSI Racing pressure plate features special single diaphragm design to increase clamp load. It features induction hardened diaphragm, CNC machined castings, stronger drive straps and rivets.PSI Racing pressure plate provides smooth and precise feel with easy modulation. All PSI Racing pressure plate is load tested on a special testing tool for quality assurance. PSI Racing ALUMINUM Flywheels are made using the highest quality, most modern materials available.
The flywheel itself is made from 6061 T6 billet aluminum. It is CNC machined at a constant surface speed for durability and finish. The friction surface is made from high carbon alloy steel. It is incredibly durable allowing the user to use just about any clutch disc material available from organic to Kevlar and even sintered iron. The friction plate can be machined or replaced as needed.
The mass at the center of the flywheel is retained for strength, but the mass at the outside is eliminated for optimum performance. Ultra light and weighs only 10.4 lbs. Meets or exceeds SFI 1.1 specification. Course ground surface to maintain coefficient of friction.
Stepped pin to maintain plate balance and placement. Tig-welded safety tab to eliminate ring gear separation. Heilicoil bolt holes to insure proper torque value and eliminate thread damage.
A set of brand new 8 ea. NOTE: Replacement of dual mass flywheel may cause added gear noise.
This complete clutch kit and flywheel package includes. PSI Racing Lightweight Aluminum Racing Flywheel. PSI Racing Heavy-Duty Pressure Plate. PSI Racing Full Face Organic Rigid Street Disc (240mm, 10 spline).
Important Note: The clutch kit and flywheel must be used together as a conversion kit. 1998 - 1999 BMW 323i convertible 2 door (E36, 2.5L 6cyl) 1998 - 1999 BMW 323is 2 door coupe (E36, 2.5L 6cyl) 1992 - 1995 BMW 325i; 325is (E36, 2.5L M50) 1994 - 1995 BMW 325i convertible (E36, 2.5L M50) 1996 - 1998 BMW 328i 4door sedan (E36, 2.8L DOHC 6cyl) 1996 - 1999 BMW 328is; 328i convertible (E36, 2.8L DOHC 6cyl) 1991 - 1995 BMW 525i (E34, 2.5L M50) 1997 - 1998 BMW 528i (E39, 2.8L M52) 1995 - 1999 BMW M3 (E36, 3.0L S50; 3.2L S52) 1997 - 1998 BMW Z3 (E36, 2.8L M52) 1998 - 2002 BMW Z3 M Coupe; Z3 M Roadster (E36, 3.2L S52). Must be in brand new, resealable condition.
Items that have been installed, used or altered are non-returnable. Powered by SixBit's eCommerce Solution. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Transmission & Drivetrain\Clutch Parts & Kits\Clutch Kits". The seller is "psintl" and is located in this country: US. This item can be shipped worldwide.